Record Enable Logic Pro X

• Record Enable Logic Pro X Pro
• Record Enable Logic Pro X10
• Record Enable Logic Pro Xp
• Record Enable Logic Pro X

Enable Record-Ready again and play, and now you should be sending MIDI from your keyboard through Logic and back to your instrument again. Step 7 - Choose A Sound Now, finally, it's time to record something. I have been using Logic Pro X for several months without any problems but now the Record Enable Button has disappeared. There is a space where it should be. If I choose 'Hide Record Enable' the space disappears, but choosing 'Show Record Enable' results in only a blank space where R used to be.

So you upgraded Logic Pro or opened a project and your record enable, freeze, or some other button in the track list is now missing. It's usually a very simple fix. Install Logic Pro for Windows PC. As we have mentioned, you cannot install the app directly on your PC. For that you need to take the route of a virtual machine. A virtualization software will enable you to run Mac OS X, virtually on your Windows PC. Here is what you need to do: For the first step download a macOS HighSierra file.

Some things should just work, amirite?

Let's say you're about to record some vocals. You've got the headphones on. The mic's powered up, and you're ready to roll.

You hit record, and the track starts to play. The first chord of the verse starts up, you take a breath and…

Nothing. Not a single word you sing comes through the headphones.

What the heck? You play back the track. Clearly you recorded something. You can hear it!

But why can't you hear it while you're singing?

So you take a trip down the Google Hole. 2 hours later, you have the dang mic coming through the headphones.

But now there's a new problem.

Instead of hearing your singing while you're singing, it's delayed in your headphones. Or even worse, you're hearing double.

w.t.f.

At this point you're convinced that either:

• Your interface is busted, or
• Logic is a crap DAW.

Either way, your urge to kill is rising:

Recording Without the Hassle

First of all – you're right. Things should just work the way you expect them to. Especially when it comes to recording.

The good news is that everything you need is literally a click away.

Logic has several Modes for a stress-free recording session. And they're sooo close by, it's easy to miss them:

Those buttons aren't there just to look good. They're huge to your recording life. Get to know these babies, cause they can save you a lot of headaches.

Software Monitoring: The Ghost in the Machine

Hearing you mic or instrument in Logic can feel surprisingly complicated.

But it's really not a big deal. The hard part is knowing what the heck it is you're looking for.

Virtual ios device on pc. This obvious but 'tough' thing you're trying to do is called Software Monitoring. You're trying to monitor your instrument through the software.

Or to put another way:

You're trying to listen to your instrument through Logic.

Once you know what you're after, it's easy to get things working.

All the Logic Modes hang out in the upper right hand corner of the Arrange Window. And Software Monitoring looks like a speaker:

If you don't see the Software Monitoring button, you'll need to dig it up.

Do this by Control-Clicking or Right-Clicking in the top part of the Arrange page, and select Customize Control Bar and Display…:

A window will now open, and all the way to the right is the Modes and Functions:

When you select Software Monitoring, the button will appear in the Control Bar.

With Software Monitoring enabled, any track that you Record-enable will be audible through your headphones and monitors.

To Record-enable your tracks, Click on the red R button in the Track Header.

Input Monitoring

Now with Software Monitoring you should be all set to hear your tracks through Logic.

But let's say you want to hear your microphone or instrument, but don't necessarily want to record. In that case you can enable Input Monitoring for your selected tracks.

It's a subtle difference, but one worth noting when it comes to monitoring your tracks through Logic:

• Enable Software Monitoring to turn on the whole system so you can hear your microphone or instrument through Logic and your plugins
  • Record-Enable any tracks you want to hear and intend to record to
  • Enable Input Monitoring for any tracks you just want to hear, but not record with

You can find Input Monitoring in the Track Header as an orange button with the letter 'I':

If you can't find it, you'll need to Configure the Track Header. To do that, use Key Command Option-T to open the Track Header menu:

At the bottom of the Buttons list is Input Monitoring. Click the box next to it and you should now have a shiny new orange button in the Track Header!

Pretty easy, right?

1. Flip Software Monitoring on for the whole project, and
2. Turn Input Monitoring on for the tracks you want to hear.

Managing Latency

Ah, but if only it were that easy.

Cause depending on your recording interface and Mac, there's a tango you'll have to dance.

Monitoring through Logic introduces a phenomenon called Latency. Latency is an audible delay of your mic signal.

For example: You try singing into the mic, and your voice comes through the headphones milliseconds after.

It's pretty hard to get into the groove if your vocals sound off the whole time!

So how do you deal with latency?

Well. It depends.

The best approach always starts with adjusting Logic's Buffer Size.

I've gone over the Buffer many times on the site, so I won't belabor the point. But if you're not familiar with the Buffer, I suggest reading this post.

Head up to the main menu bar at the top and dig into:

Logic Pro X > Preferences > Audio

Record Enable Logic Pro X Pro

Within the Audio Preferences menu is a field labeled the I/O Buffer Size. And within that menu are 6 values measured in samples:

• 32 samples
• 64 samples
• 128 samples
• 256 samples
• 512 samples
• 1024 samples

The rule here is the smaller the number, the less Latency you'll have to deal with. But the smaller the number, the more you risk the chance of crippling your Mac with System Overloads.

So you'll have to perform a balancing act:

1. How small a buffer is small enough to eliminate the latency problem? And,
2. How small is too small for your Mac to handle?

For my system, I record at 128 samples without any noticeable latency.

Which is awesome, cause then you can record with plugins 🙂

Recording With Plugins & Low Latency Mode

What's so cool about Software Monitoring is you can take advantage of the awesome plugins and routing in Logic.

If you need some reverb or delay to feel comfortable performing – throw it on your track! Let that reverb wash your self-doubt away.

Having a hard time hearing yourself in the mix? Throw on the Compressor to level out and bring out your performance.

Record Enable Logic Pro X10

Get as Plugin or Bus crazy as you like!

So you go to town. You're throwing in plugins left and right. Once you've nailed the sound you're after, you get ready and hit the record button –

But plot twist! There's that Latency again!

It turns out Plugins and Busses can add latency too. And since you've gone buck wild on your recording session, it can be a real pain to track down what's screwing things up.

To save you precious minutes of your life, Logic has a Low Latency Mode:

With the single click of a button, Low Latency Mode turns off all Latency-inducing plugins and routing:

Any Plugins that causing latency in your session are muted. Logic greys out the plugin buttons and changes the labels to orange to let you know they're muted because of the latency they introduce.

In the case of busses Logic doesn't mute busses. But instead optimizes their timing so you don't experience latency on your Reverb and Delay Channels.

Thanks to Low Latency Mode all is well, and you can enjoy latency-free recording within Logic.

Once you're done tracking, just turn off Low Latency Mode. And now all your Plugins and routing are back in action.

Enter: Your Recording Interface

The other factor in the latency equation is your recording interface.

If you've followed everything above and you don't hear any noticeable delay – sweet! Your job is done and life is beautiful.

But if you've followed everything above and you're still having problems, then you've got a bit more to go.

Direct Monitoring

For some of us no matter what we do with the Buffer, Low Latency Mode, or anything else – Latency is just a fact.

Oftentimes the culprit is a Project that has become far too big to manage effectively. By 'too big' I mean either:

• tons of tracks
• tons of software instruments
• tons of plugins and routing

Record Enable Logic Pro Xp

(And usually it's all of the above.)

Another reason could be the combination of your interface and Mac. A slower connection like USB 1.0 or an older Mac just isn't as fast as a new Mac or Thunderbolt connectivity.

Whatever the case, interface manufacturers needed a way to get around the latency problem.

The solution was to provide you with a separate Mix Software for Direct Monitoring.

Direct Monitoring is the opposite of Logic's Software Monitoring. Instead of listening to your track through Logic, you hear it directly from your interface.

For example, here's MOTU's CueMix Software:

With CueMix you can dial in the direct signal from your interface and skip Logic entirely.

Direct Monitoring has its advantages. Namely – you don't have to deal with Latency! The bummer is that you don't get to take advantage of recording with Logic's plugins.

So if your vocalist wants to sing with reverb or compression, you're out of luck.

But it's always better to have something instead of nothing. So if you haven't downloaded your interface's mix software – do it!

Just make sure to turn off Software Monitoring if you do use Direct Monitoring. Or you'll hear both the Direct Monitoring signal and the Software Monitoring signal at the same time.

The result will sound like your vocals are going through a phaser pedal.

Trippy, but not helpful.

Conclusion

Monitoring may seem complicated, but it doesn't have to be. Between Software and Input Monitoring, it's really quite easy.

Things get a little more complicated when you have to think about Latency. but thankfully Logic gives you several ways to manage Latency:

• I/O Buffer Size
• Low Latency mode

Based on your Mac and interface, you may need to find a different way to manage your monitoring latency.

Record Enable Logic Pro X

That's why you should always download your interface's mix software!

When recording audio or playing a software instrument in Logic Pro, you might experience a slight delay between playing or singing a note and when you hear the sound from your speakers or headphones. This delay is called input monitoring latency. A variety of factors contribute to input monitoring latency, including:

• The input and output (I/O) buffer size setting in Logic Pro
• The analog-to-digital (A/D) and digital-to-analog (D/A) conversion processes
• Any audio interface software that you're using
• The sample rate of your project
• Plug-ins inserted on tracks in your project

Though you can't change the amount of input monitoring latency produced by the A/D and D/A conversion processes or by your audio interface's software, you can set the sample rate of your project and adjust the I/O buffer size to minimize latency. You can also manage latency caused by plug-ins using Low Latency Mode while recording.

Set the sample rate of your project

Set the sample rate for your project when you first create it. Higher sample rates result in less input monitoring latency. However, projects with higher sample rates create larger audio files, which can increase the load on the processor and the disk of your Mac. Plug-ins also require more processing power at higher sample rates.

Adjust the I/O buffer size

The I/O buffers temporarily store some of the incoming and outgoing audio data to protect against audible dropouts, clicks, or pops. You can change the I/O buffer size at any time to minimize latency.

In Logic Pro, smaller I/O buffer sizes reduce input monitoring latency. However, smaller buffer sizes require more processing power, which can cause system overload alerts. Larger I/O buffer sizes require less processing power, but increase latency.

When recording, set the I/O buffer to the lowest setting. If you encounter system overload alerts, increase the I/O buffer size to the next setting. Projects with many tracks or a lot of software instruments require higher I/O buffer sizes, depending on the amount or RAM and the speed of the processor in your Mac.

Here's how to change the I/O buffer size:

1. Choose Logic Pro > Preferences, then click Audio.
2. Click Devices.
3. Choose the buffer size from the I/O Buffer Size pop-up menu.
   

Logic Pro shows the resulting latency under the I/O Buffer Size menu. Roundtrip latency is the total amount of input monitoring latency you'll experience from audio input to audio output.

Turn Low Latency Mode on to manage plug-in latency

Certain plug-ins can contribute to input monitoring latency, particularly dynamics plug-ins with look-ahead functions. If you're using these kinds of plug-ins in a project, you can minimize the latency they produce while recording using Low Latency Mode.

Low Latency Mode bypasses plug-ins as needed, so the amount of latency doesn't exceed the Limit setting in the Plug-in Latency section of the General Audio preferences of Logic Pro. Low latency mode is especially useful when you want to record a software instrument in a project that includes latency-inducing plug-ins.

To turn Low Latency Mode on, choose Record > Low Latency Mode.